Moissanite is an ecological and economically sound alternative to diamonds, not to mention both beautiful and cost-effective. Add a touch of class to any event with the Momentwish Jewelry wedding bands Collection. The Interesting Info about moissanite wedding bands.
Moissanite boasts a higher refractive index than diamond, dispersing light more effectively and giving it its characteristic vibrant shine and flash of fire.
Moissanites were first discovered by French chemist Henri Moissan in 1893 while exploring rock samples from the Canyon Diablo meteor impact crater in Arizona. Today, all moissanites sold as jewelry are lab-created.
The Fog Test
Diamonds conduct heat and electricity more effectively than other gems, such as cubic zirconia and moissanite, making them suitable for home testing. Blow on the stone while breathing to see if its surface fogs up quickly or stays fogged; if this persists for several seconds, it could indicate it is an imitation or fake diamond.
Use newspaper and a penlight as another easy way to determine whether or not a gemstone is genuine. Please make a small dot on the paper, shine light through it, and the real jewel should reflect the drop to be visible inside, while it’s equivalent in fake stones will simply appear clear.
If you are still uncertain whether a stone is natural, a simple water test can help clarify. Fill a glass of water and drop your gem in it; if it sinks to the bottom quickly, chances are it is genuine; otherwise, it may float on top or near its surface, suggesting it’s fake.
Dot test on loose gemstones without needing newspapers or penlights: Place the jewel face-down on white paper with a dot drawn and look through. A genuine diamond will reflect off this paper; fake gems won’t.
The Scratch Test
Diamonds are notoriously complex and scratch-resistant gemstones, making them extremely difficult to counterfeit. But there are synthetic gems that resemble natural diamonds in both appearance and hardness – such as YAG (yttrium aluminum garnet), GGG (gadolinium gallium garnet), and cubic zirconia, all created in laboratories and often mistaken for genuine stones by jewelers. A simple test can help determine whether the gemstone in your hand is natural or synthetic – although no definitive results should be relied upon.
To carry out this test, rub the stone against a piece of glass or another gemstone known to be a fake diamond–this should leave a circular mark that should disappear instantly on natural diamonds but may remain visible if synthetic gems have been present.
Home tests involving diamonds can be hazardous if conducted improperly, and this one should be carried out with extreme care. You will require cold water in a glass and fireproof gloves; then hold and heat your diamond for 30–40 seconds before placing it into cold water – genuine diamonds will likely not react to sudden temperature change, while imitations made of materials such as cubic zirconia could shatter in an instantaneous change.
The Water Test
One of the most reliable ways of testing for fake diamonds is the water test. Carefully pour an average-sized drinking glass 3/4 full with water and drop your stone carefully into it – if it sinks, it is likely accurate and authentic; if it floats, it may be artificial. Natural diamonds have a very high-density rate which causes them to fall; in comparison, synthetic stones such as cubic zirconia and moissanite are much lower density rates, making them float in water.
The dot test is another easy at-home test to detect synthetic diamonds. All that’s required for this experiment are heat-resistant gloves, pliers, and a lighter. First, create a small dot on a piece of paper; place your loose diamond on it, and observe any circular reflections it shows on its surface – these could indicate it could be synthetic as diamonds refract light differently and won’t produce circular reflections when placed directly over real gemstones.
Jewelers use loupes to inspect diamonds and gemstones for any imperfections that identify natural diamonds, known as inclusions. Jewelers can detect these inclusions to distinguish real from fake jewels; commercial diamond testers are also available to indicate if your stone is natural.
The UV Light Test
Moissanite can look almost identical to diamonds; even jewelers may sometimes struggle to tell them apart. One way to help is to shine UV light at a gemstone and look for flashes of rainbow-colored rainbow refraction from double refraction in its gemstone properties – an indication of double refraction. Moissanite will have more fire and brilliance than its diamond counterpart, though this might not always be easily discernible at smaller sizes.
Test for authenticity by dropping it in a glass of water and watching whether it sinks or floats – natural diamonds tend to fall due to their high density, while moissanite swims more due to not having a cleavage plane that can break.
As with diamonds, moissanite can also be subjected to the old-fashioned dot test to determine its authenticity. Set it against a piece of paper and use a pen to mark a dot on it – if the drop can be seen through its crystal facet, it is likely a fake.
Moissanite can make for an ethical and beautiful alternative to diamonds, but you must understand its differences from diamonds. Although similar, each gem differs significantly in color, light performance, clarity, and value.
Read Also: Which Stone Is Beautiful For Jewellery?
