Tinting your car windows can help keep the interior cool, provide privacy, and add a bit of style; however, before tinting any percentage of tint to comply with state laws. Select the best solar film for windows singapore.
Next, you will need to clean the window, measure and cut your film accordingly, and apply it directly onto it.
Clean the Window
Whether you’re applying window tints yourself or have hired a professional, it’s crucial to first carefully clean both sides of the windows to remove dust or debris that could disrupt the end result. A sponge should be used to soak windows with soapy water before wiping them down using both sides for maximum results.
After cleaning windows, let them air-dry before proceeding further. Make sure this takes place in an area out of direct sunlight so as not to discolor or damage their tint. Once dry, applying window sealant around their frames may help provide moisture protection while also eliminating air bubbles from occurring.
At this point, it’s time to prepare the tint film. Start by spraying an anti squeegee solution onto the inside surface of each window, which will act as a lubricant and reduce tear or stick risk. Once wetted down, peel off its backing and position on each window side, leaving about half an inch extra film in each corner and the top.
To ensure an appropriate fit, start by measuring your window using measuring tape. Once you know its dimensions, cut away any excess film using a cutting knife from Vinyl Frog or a similar brand. Trim any extra film from that space to size with help from an assistant to help position and cut.
Before purchasing window tint films online, be sure to familiarize yourself with all applicable rules and regulations in your state or country. Each state may impose different limitations on how dark the tint should be; some even prohibit their application entirely! It would also be prudent to test out different tint samples first, as returns or exchanges can often be difficult once applied to your car windows.
Measure the Window
Window tint is an inexpensive way to instantly enhance the aesthetic and security of your vehicle, enhance privacy, reduce security risks, and keep harmful UV rays out. Although we advise professional tint installations, those with some DIY experience may also install their car window film themselves in three easy steps.
Begin by measuring each window and writing down its lengths; this information will allow you to purchase enough film. Cut it to its appropriate size with a utility knife, ensuring an inch is left on either side for proper adhesion of tint to glass surfaces without errors during application.
Once your window is sized, spray its exterior glass surface with soapy water before applying tint to all areas. Make sure the adhesive side of the tint faces away from you for optimal placement; if needed, enlist help from someone to hold it in place while applying the tint – this way, it ensures it lines up correctly without adhering to rubber seals or the frame itself.
After placing the tint, use a vinyl Frog cutting knife or razor blade to trim away any excess film, taking care not to cut through glass surfaces. It is key to cut as cleanly and accurately as possible to avoid damaging glass or tint film.
To check the darkness of a tint, roll down half the window and slide a tint meter across its surface. This will reveal its Visible Light Transmittance (VLT), or opacity rating, which you can compare against state legal tint limits.
If the tint is too dark, two options exist for lightening it: increasing the VLT percentage or completely removing it. While partial lightening might suffice when driving in low-light conditions, complete removal may severely compromise visibility.
Cut the Film
Before cutting the tint film, ensure that both interior and exterior window surfaces are cleaned using a mixture of water and isopropyl alcohol. This will remove any dirt, oil, or residue and help the tint adhere better to glass surfaces. Once dry, measure and cut to size using either a sharp utility knife or razor blade, using enough room on both the left side for trimming on either end – this ensures proper adhesion during the application of tint to glass surfaces.
After cutting the tint film, spray both sides of the window with a soap and water solution in order to attach it temporarily. This will enable you to trim edges as necessary until ensuring an ideal snug fit for your tint. For curved windows, it may also help to heat and squeegee any small bulges that arise while applying film from outside before squeegeeing them towards the edge of the windshield for proper shrinking and sealing of the cinema to the curved window surface.
Once your film has been coated with a soapy water solution, peel back its protective backing to reveal its adhesive side. Smudge the back with soapy water before carefully positioning it on your window with enough overage on all sides; having someone help is also highly recommended, as handling and moving large sheets of tint film can be daunting on its own.
Once your film is in place, lightly apply some application solution and carefully smooth it out with a squeegee. Take care to work slowly and avoid creating wrinkles or creases during installation, as this could later prove problematic when trying to secure its adhesion with the window panes.
Apply the Film
Once your window has been cleaned and sized correctly, it is time to begin applying tint. Be sure to use a brand-cutting knife during this step for precise and clean lines that make the application much more straightforward. Also, keep everything covered in soapy water as you work!
Peel away the liner from the adhesive side of the film before spraying your window with soapy water, rolling down slightly to align up with half of the film, and spraying again as you work to ensure proper adhesion of all moisture from inside and out of your window. Squeegee out any water you find while working to ensure its adhesion with glass surfaces.
Once your top layer of film has been applied and secured in place, take a razor blade or utility knife and trim away any excess at its edges with care, leaving enough of a buffer space so you’ll have an easier time trimming any remaining edges with your heat gun.
Return to the other side of your car and apply the lower half of the film. Make sure that your tint kit is compatible with your vehicle to avoid adhesion issues, window distortion, and potential problems with adhesion.
Final Step: Heat Tint with Your Heat Gun to Remove Air BubblesEnsure to apply heat slowly and consistently so as not to damage or warp the film
Once your windows have been tinted, they will block 99% of UV solar energy that could otherwise cause your dash and upholstery to fade and crack, as well as protect you and your passengers from harmful rays, which could potentially lead to skin cancer. Window tinting can also protect your car’s resale value while improving its resale value – follow this article’s steps, and you should have no trouble producing professional-looking results that will look great for years. For any inquiries or assistance in the tinting process, please don’t hesitate – we are always more than willing!
Read also: Keeping Your Basement Dry: Understanding Foundation Drainage Systems
