It would be best to keep a few things in mind when you want to lay vinyl flooring. For one, if you plan on putting the floor up in a room with an angled wall, you should ensure the vinyl planks are lined up with the longest wall. Additionally, if you want to use horizontal steps, you should line up the vinyl planks to match up with the steps.
Staggered vinyl flooring
Staggered vinyl flooring is a great way to add more structure to your floor. It can also increase the aesthetic appeal of your home. However, there are a few pitfalls you need to be aware of when installing staggered vinyl planks.
First, you’ll want to know how to calculate the number of planks you need. Next, you need to divide your room width by the plank width. This calculation will determine how many planks you need for the first and last rows.
Next, you’ll want to space the planks in the first row. The spacing should be between 6 inches and 8 inches. If you’re using wider planks, you’ll need to increase this by a few inches.
You’ll also want to ensure the short ends of your planks don’t line up with the seams of the neighboring row. To do this, you’ll need to measure a small expansion gap.
Lastly, you’ll want to use a tool to ensure the edges of your vinyl planks are secure. A heat gun will work well for this task.
In line with the longest wall
One of the best things about vinyl is the lack of grout. Putting it in its best form can be a feat of sheer ingenuity. Fortunately, the plethora of samples has sparked a resurgence in home improvement. The question is, which flooring products will take the crown? The best bet is to choose a vendor that offers a complete product package from design to installation. There is no point in paying for a low-quality product, especially when you can have one of the best in the business. Of course, this can be a costly undertaking, albeit a worthwhile one.
In the same horizontal style as the steps
Vinyl planks can be installed in a variety of ways. The most common is the standard horizontal style. This makes the room look bigger and more open. However, if you plan to install a floor in a narrow space, you might consider installing parallel vinyl flooring.
In addition, there are many different steps you can take to ensure you get the right results. For example, the best way to install your vinyl planks is to lay them along an eight-foot wall. Depending on the type of flooring you choose, you may have to cut them to fit. Fortunately, this is not a difficult task.
Another essential step to remember is to roll the planks to the floor. This will prevent air pockets from forming and gives you an actual final product. Also, take advantage of the space between the baseboard and the vinyl tile. This will allow you to expand your room in the face of changing weather.
In rooms with angled walls
A room with angled walls can be tricky to install vinyl flooring. This installation requires careful calculation to ensure the planks are in the right place. For instance, if a wall is angled at a 45-degree angle, the first row of planks must be cut at a smaller width than usual. The last row must also be trimmed to be narrower than the other rows.
To avoid these issues, ensure your planks are at least a quarter inch from the wall. Then, you can use a tape measure or a pencil to mark the desired distance. If you do not have a tape measure, you can draw the line on a piece of cardboard or flooring.
After you’ve measured the distance, you’ll need to decide which side of the room you want to begin laying your planks on. Again, it’s best to start with the left side of the room and work your way to the right.
